Tips for Using a Refrigerator Efficiently Saving Energy

Refrigerator Efficiently Saving Energy
Spread the love

Proper use of the refrigerator not only helps to increase the life of the refrigerator, but also significantly saves energy use. In addition, all new refrigerators on the market have effective energy-saving features. Use available and verified discount codes on during festivals like Black Friday, Cyber ​​Monday, Christmas,… The following simple tips will help your family’s monthly electricity bill your family is significantly reduced.

1. Place the refrigerator away from heat sources, not close to the wall

You should not place the refrigerator near heat sources such as gas stoves, rice cookers, microwave ovens as well as sunlight. At the same time, the refrigerator should not be close to the wall because the cabinet needs space to radiate heat, helping the refrigerator work more efficiently. This is especially important because the cooling cable system behind the refrigerator needs cool air to cool, otherwise, the refrigerator is very power-hungry and degrades quickly.

2. Adjust the refrigerator temperature accordingly

Depending on the weather of the outside environment, you can adjust the refrigerator temperature to suit. You should not turn the temperature to high because it consumes a lot of energy. In the cold season, you can adjust the cold to level 3 and increase to level 4 on hot days to save electricity for the refrigerator effectively.

In addition, you can also increase or decrease the temperature flexibly according to each freezer compartment, cooler compartment and vegetable compartment. The appropriate temperature to store food on the freezer is about -18 degrees Celsius and about 2-4 degrees Celsius to keep the freshness of food and vegetables in the cooler.

3. Do not open the refrigerator door for too long

The cold air will escape when the door is open, then the compressor will work more, making you spend more electricity to cool from the beginning. Therefore, you should not open the refrigerator for too long and remember to close the refrigerator door carefully, so that the door gasket on the refrigerator is firmly attached to the body of the refrigerator.

4. Food containers made of glass or porcelain

Glass and porcelain food containers will help maintain the cold in the refrigerator better, both helping to ensure food quality and helping your refrigerator use energy savings. Therefore, you can use porcelain or glass dishes to store food. Arrange food just enough to allow cold air to be exchanged better, helping you save significant electricity bills each month.

5. Do not put hot food in the refrigerator

Hot food will increase the refrigerator temperature, causing the compressor to operate at high capacity to balance the temperature of the refrigerator. If you often put hot food inside, the life of the refrigerator will also be shortened by having to start the motor to quickly cool the refrigerator many times.

6. Keep the food in the refrigerator just enough

Arrange enough food in the refrigerator will help the cold air be better maintained thanks to the exchange of cold air back and forth between dishes and foods. If the refrigerator is too empty, the cold air exchange will take place inefficiently, wasting the family’s electricity. To overcome this situation, you can flexibly reduce the temperature so that the compressor works less.

Too much food in the refrigerator is also not a good idea because they can block the cold air vents in the refrigerator. This will increase the temperature of the refrigerator, affecting the quality of the food.

7. Turn off automatic ice making when necessary

Some refrigerators will have an automatic ice maker feature that helps you quickly have ice cubes to use. However, to save more electricity, you can turn off this feature when there is no need to use it and replace it by making traditional ice in the freezer.

8. Check the door seal regularly

The rubber seals (also known as refrigerator seals) on the door after a long time of use can be damaged, causing the refrigerator to release cold air. You can test by clamping a thin sheet of paper into the cabinet slot, if you can easily pull the paper along the gap, your rubber seal needs to be replaced. Also, remember to clean them carefully to avoid dust from opening the cabinet door.

9. Clean the condenser regularly

The condenser is responsible for dissipating the heat of the condenser refrigerant to the environment. A dirty condenser can lead to less efficient heat dissipation, making the refrigerator more energy efficient. You need to clean the condenser regularly, at least every 6 months or 1 year.

At the same time, the cooler behind the refrigerator needs to be cleaned and vacuumed to avoid dust clogging the system. If you have pets at home, cleaning should be even more frequent because this is an ideal place for animal hair to “live”.

10. Clean the refrigerator regularly

You should clean the refrigerator regularly, about every 2-3 months to avoid bacteria growth. In addition, this also helps you limit the dust and dirt sticking to the cold air supply holes, causing the compressor to work more to provide enough temperature, which wastes the family’s electricity.

Hopefully, the tips above will help you save a lot of electricity each month. Besides, you can refer to the energy-saving refrigerators on the market at stores like Best Buy, Home Depot, Walmart,… And don’t forget to save 20% Off Best Buy Coupon, Home Depot $50 Off $250 Coupon, Walmart Coupon Codes 20% Off when buying energy-saving refrigerators. Let’s practice the habit of using the refrigerator properly to make the refrigerator more durable, save money, but also protect the health of the whole family! Follow to update the latest articles.

error: Content is protected !!